2 Wheel AdvRide, Explore, rinse and repeat!

Nov 23rd RLINK For REVER

Do you travel to distant lands or perhaps just to the Starbucks around the corner? Well, either way, I have just the thing for you, especially if you like that extra sense of security along the way. Several years ago, I was introduced to the REVER motorcycling app, which tracks your rides and shows you local rides in your area. There is also an ability to share your routes with others. 

More recently, REVER introduced a motorcycle security tracking system, which connects directly to your motorcycle. This system syncs with your telephone and sends you updated alerts if your REVER unit detects movement, vibration, or a low battery. So, imagine if you were hanging out in a less than desirable area… you can have some reassurance. Should someone attempt to steal your ride, or take parts off, you can run outside and handle business… or just call the local authorities. 

I’ve been testing the generation one (1) version for roughly eight (8) months now and have observed a ton of positives and few negatives regarding the system. 

The main positives are obvious, including the aforementioned ability to receive alerts via text messaging for security purposes. Something else that is worth a mention is the fact that you can upload your routes and also live share your routes directly with family and friends. 

The only serious downside I’ve noticed about this unit is the battery current draw. I run this in parallel with the BMW audible alarm. Through testing, I have learned that when the motorcycle is not being ridden daily, the current draw is very intense, and will cause your battery to be so low that you cannot start your motorcycle. This will occur within approximately four to five days. Now, keep in mind I am running two systems, so if you only use the REVER system, you will likely have different results. I like redundancy and I like my coffee black.

If you already have the REVER app, you probably pay for the premium membership, which unlocks all of the features. This system is one of the included features with that membership. The device retails for $250 and I will post a link below. 

Direct link to system

On a side note, the generation two (2) system has been released. It is all-inclusive and takes up less room. I found out that when running my Rally seat (which is how I did my install video), I can install the system quickly and easily. However, when switching back to stock or my other aftermarket seats, I could not fit the unit in the same location and needed to reroute it further back under the tail section. This added a little more inconvenience and an extra 30-45 minutes to the install time. 

R1200 GSA Install Video

If you are not mechanically inclined, I would highly recommend allowing your dealer to install the unit, which will probably run you 1.5 hours of service. 

I look forward to seeing further advancements of this system and hearing positive outcomes from theft prevention and recovery!

Ride safe and see you out on the road.